Shenzhen Zhengtang Technology Co.
Quality - the key to business success
Add to Cart
25.6V 210AH Lifepo4 Lithium Battery Solar Golf Car Forklift Battery New
25.6V 210AH Lifepo4 Lithium Battery Solar Golf Car Forklift Battery New
Quick Detail:
Features of Forklift Lithium LiFePO4 Battery :
same capacity but much smaller size than lead acid battery
No memory,feel free to charge when you need,maintenance-free.
2000times cycle life at standard charge/discharge rate
REMA/ANDERSON plug for choice
applicabale -20~55℃,and smart BMS provide high or low temerature protection
support buzzer alaram while SOC<10% or min volt of singel cell<3.05V
CAN/RS485/RS232 communication for choice
perfect safety performance,NO leakage,No swell
pass the CE,ROHS,UN38.3,ISO9001 certification
Description:
Lithium forklift batteries can last two to four times longer than a traditional lead-acid battery. With the ability
to recharge or opportunity charge a lithium battery, you will eliminate the need to perform battery swaps,
which will reduce downtime.
Lithium forklift batteries can remain in equipment longer where one battery can take the place of three
lead-acid batteries. This helps eliminate the cost and storage space required for additional lead-acid batteries.
Lithium forklift batteries provide significantly faster-charging speeds and do not require charging cooling.
It helps optimize daily productivity and even reduces the number of forklifts required to accomplish objectives
Specifications:
EU Warehouse 48V 51.2v Lithium Ion Battery Lifepo4 100ah 200ah Battery Pack
| Batterypack | No. | Item | General Parameter | Remark | |
| 1 | Combination type | I6SIP | |||
| 2 | Total energy | 5400Wh | 2.4/kWh | ||
| 3 | Cycle life | 6000 times | |||
| 4 | Rated capacity | Nominal capacity | 100 Ah | Standard discharge after charge (fbr battery pack) | |
| Minimum Capacity | 100 Ah | ||||
| 5 | Rated voltage | 512 V | Wordking voltage | ||
| 6 | Discharge cut-off voltage | 40V | Discharge cut-off voltage | ||
| 7 | Charging voltage | 58.4V | maximum battery voltage | ||
| 8 | Internal resistance | W60m Q (the value will be adjusted fbr different cell and PACK scheme) | Under half elec trie state, use AC method to measure internal resistance Ikllz | ||
| 9 | consistency | The monomer pressure difference at the end of charge and discharge is less than 250mV | What is recorded is the highest/low 3.65V/2.5V instantaneous pressure difference in a single charging section | ||
| 10 | Maximum charge and discharge duration current | I00A | |||
| 11 | The charging current limiting | 10A | |||
| 12 | forking temperature range | Charge: 0-55'C | |||
| Discharge: -20-^0'C | |||||
Notices:
1. For outdoors, only to generate power. The efficiency of a solar panel is variable depending on
environmental conditions.
2. Avoid any shelter (such as buildings, plants, etc.) during use, otherwise, the charging speed will be
negatively affected.
3. After the device is successfully connected, it is recommended to move your electronic device into a
cool and ventilated place. If the electronic device is in a high-temperature environment for a long time,
power consumption will increase and may occur power failure.
Applications:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A. Sample needs 5-10 days, mass production time needs 3-5 weeks, it depends on order quantity.
Q3. Do you have any MOQ limit?
A. Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample
order is available. Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A. We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping is also optional.
Q5. How to proceed with an order?
A. Firstly let us know your requirements or application. Secondly, We quote according to your require-
ments or our suggestions.Thirdly customer confirms the samples and places a deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A. Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Contact us for more details about Price, Packing, Shipping and Discount.