Shenzhen Zhengtang Technology Co.
Quality - the key to business success
Add to Cart
LiFePO4 Forklift Battery Deep Cycle 24V 48V 26V 80V Lithium Forklift Battery
LiFePO4 Forklift Battery Deep Cycle 24V 48V 26V 80V Lithium Forklift Battery
Quick Detail:
Lithium iron phosphate battery pack 25.6V 280AH LiFePO4 battery pack:
1. Low internal resistance, low self-discharge, no memory effect, safety and environmental protection.
2. Long cycle life and high specific energy. The life of a single cell ring is more than 4000 times.
3. Flexible packaging, laminated type, lean liquid, good safety.
4. The product is maintenance-free, has a wide operating temperature range, high reliability, and
is environmentally friendly and pollution-free.
5. Capacity, magnification and size can be customized. The battery combination method can be
based on customer requirements.
6. Diversified product structure, providing one-stop solutions for various application fields
Description:
Li Ion batteries represent a family of chemistries typically relating to the cathode chemistry and in
the case of Titanates, the anode. The different chemistries have different characteristics and costs
that make them suitable for different applications.
For industrial applications, FePO4 is the favoured for cost and safety reasons, as it is not susceptible
to thermal runaway and does not include expensive cobalt as part of its cathode. Hardcase, prismatic,
large format batteries with costs of around €0.50/Wh are now readily available. When combined with
a suitable battery management system, these batteries are already capable of competing favourably
with Lead Acid when viewed on a lifetime costs basis.
Offering motive power batteries in 12V, 24V, 36V, 48V, 60V, 80V, 96V and other custom voltage applications.
Specifications:
| ELECTRICAL SPECIFICATIONS | |
| Nominal Voltage | 25.6V |
| Nominal Capacity | 200Ah |
| Nominal Energy | 5120Wh |
| nternal Resistance | <30 @50% SOC |
| Capacity | @40A: 300minutes(5hours) |
| Self Discharge | 5% /per month |
| Tlaximum In Series | 2PCS |
| Maximum In Parallel | No limit |
| Discharge Current and Voltage Specifications | |
| 71 AX Continuous Discharge Current | 200A |
| Peak Current | 500A |
| Discharge pulse current | 700±50A (31±10ms) |
| BMS Low Voltge Cut-off | 20V (2.0V±0.05v) pc) |
| Short Circuit Protection | 200-800 ps Auto recover or charge release |
| Temperature Ranges | |
| Discharge Temperature | -20 ~ +65°C |
| Charge Temperature | -20 ~ +45°C |
| Storage Temperature Range | -20 ~ +45°C |
| BMS High Temperature Protection | 90°C |
| Battery High Temperature Protection | 60°C |
| MECHANICAL SPECIFICATIONS | |
| Terminal Type | M8 |
| Weight | 41kg |
| Case Dimension(L'W'H) | 550*305*260mm |
| Case Type | Metal case |
| Cell type / Chemistry | LiFePO4 |
| LCD or Bluetooth Function | Optional |
| BMS:low voltage,high voltage.over temperature, | |
| Over current,short-circuit protection .etc | |
| Charge Current and Voltage Specifications | |
| Max Charge Current | 200A |
| Recommended Charge Current | 40A-100A |
| End of Charge voltage | 28.8V±0.2V |
| Balancing current | Auto start |
| Balancing Voltage | 3.6V±0.05v pc |
| COMPLIANCE SPECIFICATIONS | |
|
| CE for Battery Pack |
| Certifications | UL1642 & IEC62133 & BIS for |
|
| cells |
| Shipping classification | UN 3480 |
Notices:
1. For outdoors, only to generate power. The efficiency of a solar panel is variable depending on
environmental conditions.
2. Avoid any shelter (such as buildings, plants, etc.) during use, otherwise, the charging speed will be
negatively affected.
3. After the device is successfully connected, it is recommended to move your electronic device into a
cool and ventilated place. If the electronic device is in a high-temperature environment for a long time,
power consumption will increase and may occur power failure.
Applications:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A. Sample needs 5-10 days, mass production time needs 3-5 weeks, it depends on order quantity.
Q3. Do you have any MOQ limit?
A. Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample
order is available. Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A. We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping is also optional.
Q5. How to proceed with an order?
A. Firstly let us know your requirements or application. Secondly, We quote according to your require-
ments or our suggestions.Thirdly customer confirms the samples and places a deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A. Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Contact us for more details about Price, Packing, Shipping and Discount.