Shenzhen Zhengtang Technology Co.
Quality - the key to business success
Add to Cart
51.2V100ah Deep Cycle Lithium Ion Battery LiFePO4 Battery UPS Battery Reacharge
51.2V100ah Deep Cycle Lithium Ion Battery LiFePO4 Battery UPS Battery Reacharge
Quick Detail:
>4000 Cycles at 80% depth of discharge
Hidden On/Off key (RST key , press and hold >3s)
Create 48 Volt Storage Systems
Connect in parallel, up to 16 for 81,920 Watts
Automatic system cell balancing
All parameters available on LCD display
Temperature monitoring (high and low cut-off), 6 temperature sensors
Exceptional voltage stability
Maintenance-free
No hydrogen generation or gassing
<70% the weight of similarly sized SLA batteries
Description:
1,Longer Cycle Life: Offers up to 20 times longer cycle life and five times longer float/calendar life than
lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
2,Lighter Weight: About 40% of the weight of a comparable lead acid battery, A'drop in' replacement for lead acid batteries
3,Higher Power: Delivers twice power of lead acid battery,even high discharge rate, while maintaining high energy capacity.
4,Wider Temperature Range:-20ºC~60ºC
5,Superior Safety: Lithium lron Phosphate chemistry eliminates the risk of explosion or combustion due to high
impact,overcharging or short circuit situation,
6, increased Flexibility: Modular design enables deployment of up to four batteries in series and up to ten batteries in parallel.
Specifications:
| Batterypack | No. | Item | General Parameter | Remark | |
| 1 | Combination type | I6SIP | |||
| 2 | Total energy | 5l20Wh | 5.12/kWh | ||
| 3 | Cycle life | *000 次 | |||
| 4 | Rated capacity | Nominal capacity | 100 Ah | Standard discharge after charge (fbr battery pack) | |
| Minimum Capacity | 100 Ah | ||||
| 5 | Rated voltage | 512 V | Wordking voltage | ||
| 6 | Discharge cut-off voltage | 40V | Discharge cut-off voltage | ||
| 7 | Charging voltage | 58.4V | maximum battery voltage | ||
| 8 | Internal resistance | W60m Q (the value will be adjusted fbr different cell and PACK scheme) | Under half elec trie state, use AC method to measure internal resistance Ikllz | ||
| 9 | consistency | The monomer pressure difference at the end of charge and discharge is less than 250mV | What is recorded is the highest/low 3.65V/2.5V instantaneous pressure difference in a single charging section | ||
| 10 | Maximum charge and discharge duration current | I00A | |||
| 11 | The charging current limiting | 10A | |||
| 12 | forking temperature range | Charge: 0-55'C | |||
| Discharge: -20-^0'C | |||||
Notices:
1. For outdoors, only to generate power. The efficiency of a solar panel is variable depending on
environmental conditions.
2. Avoid any shelter (such as buildings, plants, etc.) during use, otherwise, the charging speed will be
negatively affected.
3. After the device is successfully connected, it is recommended to move your electronic device into a
cool and ventilated place. If the electronic device is in a high-temperature environment for a long time,
power consumption will increase and may occur power failure.
Applications:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A. Sample needs 5-10 days, mass production time needs 3-5 weeks, it depends on order quantity.
Q3. Do you have any MOQ limit?
A. Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample
order is available. Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A. We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping is also optional.
Q5. How to proceed with an order?
A. Firstly let us know your requirements or application. Secondly, We quote according to your require-
ments or our suggestions.Thirdly customer confirms the samples and places a deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A. Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Contact us for more details about Price, Packing, Shipping and Discount.